Acrylic acid
Study on effect of aluminum nitrate on conductivity properties of hydrogel nanocomposite based on Acrylic acid/CNTs [Volume 7, Issue 2, 2018, Pages 57-61]
Activation
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Adhesion
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Adsorption
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Adsorption
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
Age Hardening
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Alumina/aluminium titnate
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Alumina-based coatings
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Aluminum
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Anodizing
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
Austempering treatment
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
B
Ball milling
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Battery
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
Benzotriazole
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Bimodal high density polyethylene
Effect of carbon black masterbatch and polymer process aids based on fluoroelastomer and hyper branch polymers on melt fracture of bimodal polyethylene [Volume 7, Issue 3, 2018, Pages 67-79]
Bioactive Glass
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Bioactivity
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Bone tissue engineering
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
C
Carbon Nanotube
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
Ceramic
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Characterization
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Chemical getter
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Chitosan
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Coconut coir
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
CoFe2O4
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Co-Mg-Ferrite single phase
Thermo mechano-chemical synthesis, physical characterization and magnetic properties of Co-Mg-ferrite nanoparticles [Volume 7, Issue 2, 2018, Pages 1-6]
Commercial pure aluminum
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Composite
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Composite
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Corrosion behavior
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Corrosion Resistance
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Co-Zn ferrite
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Cr2O3-YSZ-SiC
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Crack propagation
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
Cu ions
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
D
Density functional theory (DFT)
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
Drug delivery system
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
E
Electrical conductivity
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Electrophoretic deposition
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Electropolishing
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Electrospinning
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
F
Friction Stir Processing
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
G
Green Pesticide
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
H
Hardness
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
Hardness
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
HAZ liquation cracking
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Hydrogel
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Hydrothermal Synthesis
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
I
Inconel 718 alloy
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
In-situ sintering
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Iron-Nitrogen
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
K
K-Carrageenan
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
L
Lithium-ion
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
M
Magnesium biodegradable scaffold
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Magnetic nanoparticles
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Magnetic properties
Thermo mechano-chemical synthesis, physical characterization and magnetic properties of Co-Mg-ferrite nanoparticles [Volume 7, Issue 2, 2018, Pages 1-6]
Mechanical milling
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Mechanical properties
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Mechanical properties
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Mechanical Strength
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Microstructure
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
Microstructure
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Microstructure analysis
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Molecular Dynamics Simulation
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Molecular Dynamics Simulation
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
Molecular structure
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
N
Nano-Complex
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Nano composite
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Nanocomposite
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Nano-diamond
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Nanoemulsion
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
Nano-structured bainitic steel
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
Nd:YAG pulsed laser
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Nitrate removal
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
O
Osteoconduction
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
P
Perchloric Acid
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Persian cumin
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
Photoanode
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
Plasma spray
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Powder Injection Molding
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Powder Metallurgy
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Powder Metallurgy
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Praseodymium
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Precipitate
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Pulse current
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
R
Radial distribution function
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Rheology
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Rheology
Effect of carbon black masterbatch and polymer process aids based on fluoroelastomer and hyper branch polymers on melt fracture of bimodal polyethylene [Volume 7, Issue 3, 2018, Pages 67-79]
S
Self-healing mechanism
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Silicon carbide
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Silk Fibroin Nanofiber
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
Sol-Gel
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Solution combustion synthesis
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Spark Plasma Sintering
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Spark Plasma Sintering
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Specific capacitance
Supercapacitive properties of graphitic-carbon nitride deposited on reduced titanium dioxide porous nanostructured substrate [Volume 7, Issue 3, 2018, Pages 19-24]
Specific surface area
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Stainless steel
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Stainless steel
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Surface modification
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Surfactant
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
T
Thermal decomposition
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Thermal shock
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Thin film
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Ti and Sn doped hematite
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
Tissue engineering
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
Titanium Boride
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
V
Vanadium pantoxide
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
W
WC-Co nanopowder
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Weldability
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Y
Yttrium
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Z
Zirconium Diboride
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Zn
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]